HP Officejet Pro 8000 and Officejet Pro 8500 Ink Supply System. Quick Fill Station

     

 

HP 940 cartridges have a chip cap that will be removed and placed on our continuous ink system or Quick Fill Cartridges. NO MORE CUTTING OFF CHIPS!

We recommend that the chip caps  be install on the continuous ink system or quick fill cartridges before any of the cartridges show low or out of ink. If the cartridge is allowed to go completely empty sometimes it may fail after installing.

Remove the HP chip cap off the HP cartridges. This is very easy to do.

The chips will be in perfect aliment.
 

Place it on the ink supply cartridge or quick fill cartridge. Simple and Easy!

 

 

 

 

 

 

 
Cutting of the chip with a sharp knife can cause damage to the chip.

This method is still used by the cheaper ink systems.

 

This chip was damaged by cutting it off the HP cartridge.

 

 

Our new HP ink supply system or Quick Fill Stations have the new " out of ink sensor ". No more damaged to the printheads because the ink ran out of the ink bottles or cartridges

 

 

Our Continuous ink system for Officejet Pro 8500 and Pro 8000 is pre filled with our New High Definition UV Dye Base ink or our Pigment ink ( waterproof ink )
Our Ink System nnow includes " out of ink warning sensor ". If the ink bottle or bottles go empty the cartridge sensor will stop the printer from printing to protect the printhead from failure.

Our New Ink Systems uses a new clog free formula.
This ink will never clog your printheads like cheaper ink.
Our ink will blend with HP's pigment ink and does not require flushing of the printheads.

Photo instructions will help guide you through setup.
Simple and Easy To Install !
Ink levels will not reset to full. This is not needed with our ink system.
Free set of purge syringes. They will save your printheads from failure!
* Customer must install a set of chip caps off the HP cartridges.

 

 

 

HP Quick Fill Station For HP Officejet-Pro-8000 or Officejet Pro 8500 Pre primed ( not filled with ink )
Now includes " out of ink warning sensor ". If a cartridge should go empty the cartridge sensor what stop the printer from printing to protect the printhead from failure.
Includes High Capacity Cartridges
No need to remove the cartridges for refilling
Great for business or small home office. Included free purge tools

Our HP High Capacity Refillable Quick Fill Station
1. No need to remove the unit for refilling.
2. No hoses hanging out of the printer.
3. Installs in less then 5 minutes.
This makes refilling simple and Easy!
* Because of the high capacity of the cartridges the cartridge door will not close.
Customer must remove the HP chip cap off the HP cartridges and install on the station
The ink level will not reset to full but you can still print.
 
 

We supply a set of purge tools with all our refill kits, ink supply systems and quick fill stations.

 It is a good practice to purge air from the ink lines of the printer from time to time.

 

 
 

HOME PAGE