Our New HP & Canon Snap & Vac Tools For The
Color Or Black Cartridge
For use In HP printer that uses
these cartridges:
HP 21 Black, 22 Color,
HP 27 Black, 28 Color,
HP 56 Black, 57 Color,
HP 74 Black,
HP 75 Color,
HP 92 Black, 93 Color,
HP 94 Black, 95 Color,
HP 97, Color, 98 Black,
HP 60 Color, 60 Black, 901 Color and Black
For use in any Canon printer that uses
these cartridges.
PG-30 / PG-40 / PG-50- 210 Black Cartridge,
CL-31 / CL-41 / CL-51- 211 Color Cartridge
These tools are for priming a refilled
cartridge. This tool is great to stabilize the internal pressure
of the cartridge after refilling. We invented this type of
tool over 10 years ago.
 |
Our Snap & Vac
refill tool is
also supplied with our refill kit. This amazing tool can
prime the color or black cartridge after refill. This is
very important should you run the cartridge out of ink.
Insert the tip of the syringe into
the bottom of the snap & vac. Now pull back slowly and
you will feel a small amount of resistance. You should
see some ink being drawn into the syringe. Draw the
plunger to about 8 to 10 cc mark and hold it there for
about 15 to 20 seconds. Slowly let the plunger return.
|
|
 |
When ordering make sure you put enter your cartridge number!
We also include a refill / storage clip. |
 |
For very stubborn clogs or old
cartridges we have supplied a soaking tray. Fill the tray with
the printhead cleaner and let the cartridge sit for about one
hour. Then clean the printhead with a paper towel. Use the Snap
& Vac to draw out the ink.
|
|
|
Never put a dripping over filled cartridge
in the printer. If the printhead on a cartridge is leaking ink
then it will not print. Over filling of the cartridges can cause
poor print quality.
|
HOME
BUY
NOW CANON
BUY NOW HP